Our Work

Work from the bench, the field, and everywhere in between.

Real repair, data recovery, business IT, networking, security, cabling, and installation work completed by ProTek.

Our Work

Real work from our shop.

Every project below is a real job. What came in, what we did, and how it turned out.

PTZ security camera mounted on an exterior wall beside a window, with conduit running down the wall. — General
Project/General/Oct 30, 2026

A large parking lot calls for more than a wide-angle view.

A high-rise camera installation overlooking a large parking lot, with optical zoom to bring distant areas into view.

  • General
View work
Closeup under the microscope of a flash drive circuit board with a hand-run jumper wire bypassing damaged traces. — data-recovery
Project/data-recovery/Oct 30, 2026

Under the Microscope: A Flash Drive Board, Repaired by Hand

  • data-recovery
View work
Oscilloscope on the ProTek bench showing live waveforms while tracing a fault on a circuit board. — Repairs
Project/Repairs/Oct 30, 2026

On the Bench: The Oscilloscope

  • Repairs
View work
Network runs from the main level coming through the top plate in two clean bundles, strapped down into the basement where the rack will live. — networking
Project/networking/Oct 30, 2026

Main Level Run, Down Into the Basement

  • networking
View work
Main trunk run of network cables strapped in clean during a home rough-in, with a conduit and mule tape left ready for the internet provider. — networking
Project/networking/Oct 30, 2026

Rough-In Done Right, Ready for Drywall

  • networking
View work
Wall rack built by ProTek with UniFi switches and patch panels, a Juke whole home audio unit, and a UPS battery backup. — networking
Project/networking/Oct 30, 2026

One Rack Runs the Whole House

  • networking
View work
Microscope close-up of the liquid-damaged NVMe circuit board showing corrosion — General, Madison AL
Project/General/Madison AL/Oct 13, 2026

NVMe Liquid Damage: Mapping Corrosion Under the Microscope

  • General
View work
Door Sensor and Security Panel Wiring in Madison AL project image for On-Site
Project/On-Site/Oct 11, 2026

Door Sensor and Security Panel Wiring in Madison AL

Finishing up wiring in door sensors and monitoring panels.

  • On-Site
View work
Custom Gaming Computer Build in Madison AL project image for Repairs
Project/Repairs/Oct 11, 2026

Custom Gaming Computer Build in Madison AL

We build custom gaming PCs in Madison, AL. You pick the parts or we spec the whole thing for you. Doesn't matter if you want a budget 1080p machine or a 4K monster. Every build gets burn-in tested and a full QC pass before it leaves our shop. Then it's covered by a local warranty. Something goes wrong? You bring it to us. Not a shipping label. Not a call center. Us. Right here in Madison. We serve gamers across Huntsville and North Alabama. If you're thinking about a custom build, come talk to us first. We'll spec it right and build it right.

  • Repairs
View work
Business Access Control Installation in Madison AL project image
Project/Oct 10, 2026

Business Access Control Installation in Madison AL

Need to control who gets in your building? We install access control systems for businesses in Madison and Huntsville AL. Keypads, card readers, door controllers. We wire it, configure it, and make sure it works with your existing setup. No more rekeying locks when someone leaves. You manage it all from your desk. ProTek handles the full install. We run the cable, mount the hardware, program the system, and show your team how to use it. If your business needs better door security in the Madison or Huntsville area, talk to us. We do this right the first time. Every door gets tested. Every credential gets verified. You get a system you can trust.

View work
Xbox Series X HDMI Port Replacement in Madison AL project image for micro-soldering
Project/micro-soldering/Oct 10, 2026

Xbox Series X HDMI Port Replacement in Madison AL

Xbox Series X with no video? It's the HDMI port. The pins inside bend when the cable gets yanked or the console gets moved while plugged in. We replace Xbox Series X HDMI ports in our Madison, AL shop. It's micro-soldering under the microscope. Pull the bad port, clean the pads, solder on a new one, test it. We keep the ports in stock so you're not waiting weeks or shipping your console across the country. If you're in Huntsville or Madison and your Xbox won't show a picture, bring it by. Most of these go out in a day or two. We'll get you back gaming.

  • micro-soldering
View work
Xbox HDMI Port Repair in Madison AL project image for micro-soldering
Project/micro-soldering/Oct 10, 2026

Xbox HDMI Port Repair in Madison AL

Your Xbox has no signal on the TV. The HDMI port is probably damaged. We replace Xbox HDMI ports in our Madison, AL shop. We keep ports in stock for Xbox Series X, Series S, and One, so most of these turn around fast. Micro-soldering work, done right. Serving Madison, Huntsville, and North Alabama.

  • micro-soldering
View work
Whole Home Audio Installation in Madison AL project image for residential
Project/residential/Oct 10, 2026

Whole Home Audio Installation in Madison AL

Whole-home audio, finished and sounding great. Music in the kitchen, something different on the patio. Each area is controlled separately so everyone can enjoy their own music.

  • residential
View work
Network Rack Installation in Madison AL project image for business-it
Project/business-it/Oct 10, 2026

Network Rack Installation in Madison AL

A real estate company called and asked if we could install a two-post network rack. Yep. Their IT team handled the equipment. We handled the part that needed drilling into concrete and making sure the rack was not going anywhere. Mounted, anchored, and ready for their team.

  • business-it
View work
Network Cable Testing in Madison AL: Every Run, Every Time project image for networking
Project/networking/Oct 10, 2026

Network Cable Testing in Madison AL: Every Run, Every Time

Remember all that cable we pulled? Now we test every single run. Terminate it. Test it. Pass. Then it is ready for drywall. No run gets buried until i

  • networking
View work
Outdoor Live Stream Setup in Madison AL project image for business-it
Project/business-it/Oct 10, 2026

Outdoor Live Stream Setup in Madison AL

A&M University needed to live stream their outdoor tennis matches, and we made it happen. Outdoor pole-mounted enclosure with a wireless bridge, built

  • business-it
View work
Swollen MacBook Battery Replacement in Madison AL project image for computer-repair
Project/computer-repair/Oct 10, 2026

Swollen MacBook Battery Replacement in Madison AL

Is your MacBook trackpad popping up? Case not sitting flat? That's a swollen battery. It's not just annoying. It's a safety issue. Lithium batteries swell when they fail, and a swollen one can be dangerous. Stop charging it. We replace swollen MacBook batteries in our Madison, AL shop. Most of the time it's same-day. We open it up, remove the bad battery safely, install a new one, and test everything. If you're in Madison or Huntsville and your MacBook battery is swelling, bring it in now. Don't put it off. And definitely don't poke it. Seriously. Bring it in. We'll take care of it.

  • computer-repair
View work
Retrofit Network Cable Installation in Huntsville AL project image for networking
Project/networking/Oct 10, 2026

Retrofit Network Cable Installation in Huntsville AL

Sheetrock went up before the holes were drilled. The wiring was already in place, so getting it through the door frames was the interesting part. Ready

  • networking
View work

Showing 18 of 64 projects. More load as you scroll.

Serving Huntsville, Madison, Florence, Jasper, Lynchburg, Smith Lake, Tims Ford, and surrounding areas

@theproteksFollow shop and field updates on Instagram